Air Condition and Mechanical Ventilation (ACMV) systems is the heart of the building, provides the occupants with a clean and comfort environment. Validation testing will assure that your ACMV systems are operating correctly to the original design. Our testing identifies any defects, which could result in loss of comfort and increase of indoor pollutants.
We offer the following ACMV testing services:
– Indoor air quality Testing
– Room Ventilation Testing
– Air Balancing Testing
– Air Change Rate Testing
– Air Flow Testing
– Hepa Filter Integrity Testing
– Airborne Particle Count Testing
– Temperature And Humidity Testing
– Lighting Level Testing
– Noise Level Testing
HVAC Engineering Pte Ltd offers room ventilation testing services. Our engineers assess the premise and provide test reports with a floor diagram.
– Supply air at each diffuser (in CFM)
– Return air at each return diffuser (in CFM)
– Exhaust air at exhaust air duct (in CFM)
– Total supply air into the room (in CFM) and total exhaust air (in CFM).
– Room pressure compared to corridor or surrounding area
– Air change rate per hour
We offer air change rate test services. Air Flow Hood or Balometer will be used to measure volumetric air flow from diffusers, grilles and vents.
Commercial buildings, Hospitals, Schools, Laboratories and other facilities are required to maintain certain amount of air exchanges and pressure differences throughout their facilities.
Air change rate refers to the number of times the air is changed within a room. It is simply calculated by taking the total volume of air introduced into the room over an hour and dividing it by the volume of the room. It is expressed as air changes per hour (ACH).
We offer HEPA filter integrity testing services. HEPA filters are one of the most important elements of a cleanroom/hospital. They consist of a large, box shaped filter that removes airborne particles of specific sizes very efficiently. They must also be monitored and tested regularly to make sure they are still integral.
HEPA filters are composed of a mat of randomly arranged fibres, which are typically composed of fiberglass with diameters between 0.5 and 2.0 microns. Key factors affecting function are fibre diameter, filter thickness, and filter face velocity.
We offer temperature and relative humidity testing services. Temperature and relative humidity testing will be conducted using Temperature and relative humidity datalogger or meter. We also offer Temperature and RH mapping study for commercial office, warehouse, hospitals and industrial premise.
HVAC Engineering Pte Ltd offers Lighting level testing services. Lighting level testing will be conducted using Lux meter.
HVAC Engineering Pte Ltd offers sound or Noise level testing services. Noise level testing will be conducted using Type 1 sound level meter.
We offer airborne particulate count testing services. Airborne Particulate Count Testing are performed using TSI Dusttrak DRX Monitor Model 8533. The TSI DustTrak Model 8533 is a desktop instrument that measure size fractions of the sampled aerosol in addition to making a mass based photometric measurement. This equipment simultaneously measure size segregated mass fraction concentrations (PM1, PM 2.5, PM4, PM10, and Total Particulate Matter) over a wide concentration range (0.001– 150 mg/m3 ) in real time.
HVAC Engineering Pte Ltd offers air balancing services. Air balancing at any premise is important to ensure proper operation and performance. Overtime, ACMV systems lose its efficiency, leaving you with unbalanced air flow. Air balancing will create and maintain a comfortable and healthier indoor environment for occupants and it ensures the proper air changes in the occupied space. At HVAC engineering, we perform air balancing as part of ACMV validation.
For more information, please call us to 6246 1107 or send email to email@example.com